 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| P9 Vishay Sfernice 9 mm Multi-Ganged Potentiometer FEATURES * Conductive plastic element * Ultra compact (extra miniature module size) * Multiple assemblies (up to seven modules) * Shaft and panel sealed option * Center mechanical detent fully integrated in option * Center tap option * Custom designs available on request RoHS COMPLIANT DIMENSIONS in millimeters [inches] ( 0.5 mm) P9A 9.5 [0.37] L: see Shaft Table 3.6 [0.14] 2.5 [0.10] 2.5 [0.10] 1 [0.04] M7 x 0.75 11.35 [0.45] P9 6.4 [0.25] 3 3.5 [0.14] 2.5 [0.10] 2.5 [0.10] 7 [0.276] 5 [0.20] 2.5 [0.10] 0.9 [0.04] 0.45 R [0.02] P9A: Vertical Mounting 3.45 [0.14] 3.8 [0.15] P9A Center Tap: 2 [0.08] see Shaft Table 7.5 [0.30] 4.7 [0.19] 2.5 [0.10] 3.5 [0.14] 3x 0.9 2.5 [0.04] [0.10] 2.5 [0.10] 2.5 [0.10] 5.6 [0.22] 0.2 [0.01] 2.5 [0.10] see Bushing Table 2.5 [0.10] P9A Center Tap: Vertical Mounting 7.5 [0.30] 2.5 [0.10] 7.9 [0.31] www.vishay.com 1 For technical questions, contact: sfer@vishay.com Document Number: 51047 Revision: 26-Nov-07 P9 9 mm Multi-Ganged Potentiometer Vishay Sfernice P9 - GENERAL SPECIFICATIONS ELECTRICAL Resistive Element Electrical Travel linear law Resistance Range non linear law linear law non linear law Power Rating at 70 C multiple assemblies linear law multiple assemblies non linear law Temperature Coefficient (Typical) Limiting Element Voltage End Resistance (Typical) Contact Resistance Variation Independent Linearity Insulation Resistance Dielectric Strength Attenuation (Typical) linear law (typical) linear law (typical) 0.05 W per module 0.025 W per module 500 ppm 10 VDC 50 VAC 3 2 % of nominal resistance 5% 100 M at 250 VDC 300 VAC during 1 min 90 dB max./0.05 dB min. 2.2 k up to 500 k 0.1 W 0.05 W Conductive Plastic 270 10 1 k up to 1 M MECHANICAL Mechanical Rotational Life Mechanical Travel Operating Torque End Stop Torque Shaft Push/Pull Force Weight (One Module) 25 000 cycles min. 300 5 0.2 Ncm up to 2.5 Ncm (0.3 to 3.5 oz.inch) 50 Ncm max. (4.4 lbinch max.) 7 DaNcm max. (15.7 lbf max.) 6.25 g (without nut and washer) (0.22 oz.) ENVIRONMENTAL Temperature Range Climatic Category - 55 C up to 100 C 55/100/21 MARKING * Type of element * Code for tolerance * Code for ohmic value * Taper * Code for date code PACKAGING * B2 = Box of 25 pieces * B4 = Box of 100 pieces Document Number: 51047 Revision: 26-Nov-07 For technical questions, contact: sfer@vishay.com www.vishay.com 2 P9 Vishay Sfernice 9 mm Multi-Ganged Potentiometer PERFORMANCES TYPICAL VALUE AND DRIFTS TESTS CONDITIONS 1000 h under nominal power at 70 C (90 ON/30 OFF) - 55 C to + 100 C 5 cycles 21 days at 40 2 C and 90 - 95 % relative humidity 25 000 cycles at rated power 90 % of electrical travel 16 cycles per minute Temperature: 20 C 50 g, 11 ms 3 shocks - 3 directions 10 - 55 Hz 0.75 mm or 10 g 6h RT/RT (%) 5% 0.5 % R1-2/R1-2 (%) 10 % OTHER Contact resistance variation < 5 % Rn Insulation resistance > 10 M Load Life Temperature Cycle Moisture 5% - Rotational Life 6% 12 % Contact resistance variation Shock 0.2 % 0.5 % - Vibration 0.2 % - 0.5 % SAP ORDERING INFORMATION (Part Number 18 digits) P 9 A 1 R 1 0 0 F I R X 1 1 0 3 M A MODEL NUMBER OF MODULES 1 to 7 BUSHING R = M7 x 0.75 - 7 mm X = M7 x 0.75 - 5 mm LOCATING PEG PANEL SEALED DETENT OPTION SHAFT PIN STYLE RESISTANCE CODE/ TOLERANCE CODE/ TAPER BUSHING X: Bushing R: Bushing * Nut tightening torque M7 bushing 120 Ncm max. (10.6 lbinch max.) * Nut and washer are delivered in standard packaging M7 x 0.75 M7 x 0.75 10 5 [0.20] 7 [0.28] 2 M7 x 0.75 0.7 www.vishay.com 3 For technical questions, contact: sfer@vishay.com Document Number: 51047 Revision: 26-Nov-07 P9 9 mm Multi-Ganged Potentiometer Vishay Sfernice SAP ORDERING INFORMATION (Part Number 18 digits) P 9 A 1 R 1 0 0 F I R X 1 1 0 3 M A MODEL NUMBER OF MODULES BUSHING LOCATING PEG 0 = without 1 = with PANEL SEALED DETENT OPTION SHAFT see code below PIN STYLE RESISTANCE CODE/ TOLERANCE CODE/ TAPER 0 = without 0 = without P = with M = center detent LOCATING PEG 2 [0.08] 0.8 [0.03] 0.8 [0.03] 5.6 [0.22] PANEL SEALED * Only for R bushing without locating peg. * Front mounting surface for R bushing with panel sealed option is: 6.2 mm 0.5 * The ring is delivered with nut and washer. * The seal should be placed between panel and body. Sealing is obtained by tightening the seal against the panel when mounting the potentiometer. Tightening torque 50 Ncm up to 100 Ncm * Advised Panel Hole dimensions DETENT OPTION * Stable position and in Mid mechanical travel * Rotational life: 10 000 actuations Full CW Full CCW O 6.9 [0.27] O 6.9 [0.27] 2.35 4.7 [0.09] [0.19] SHAFT DIAMETER - FMS - STYLE L (mm) Style O 3.5 O6 Round DFR FFR 15 Slotted DFS FFS Flat DFF FFF Knurled FGK (1) Round DIR FIR 20 Slotted DIS FIS Flat DIF FIF Round DLR FLR 25 Slotted DLS FLS Flat DLF FLF Round DMR FMR 30 Slotted DMS FMS Flat DMF FMF Note (1) For X bushing (16 mm) Round Slotted Flat For D Diameter: O 4.7 mm For F Diameter: O 6 mm P2 1 [0.039] P1 0.5 [0.020] 1.6 [0.06] O L 20 Knurled 6 [0.236] 5 [0.197] O 1 [0.039] L 0.5 [0.020] P1 P2 Document Number: 51047 Revision: 26-Nov-07 O 3.5 = 2.5 mm O 6 = 4.5 mm L = 15 mm 7 mm L > 15 mm 12 mm 18 teeth 90 For technical questions, contact: sfer@vishay.com www.vishay.com 4 P9 Vishay Sfernice 9 mm Multi-Ganged Potentiometer SAP ORDERING INFORMATION (Part Number 18 digits) P 9 A 1 R 1 0 0 F I R X 1 1 0 3 M A MODEL NUMBER OF MODULES BUSHING LOCATING PEG PANEL SEALED DETENT OPTION SHAFT PIN STYLE see Pin Table First digit: Pin type X, J, S, Z, P, L W or N Second digit: Pin Configuration 1, 2, 3, 4 or N RESISTANCE CODE/ TOLERANCE CODE/ TAPER PIN STYLE - HORIZONTAL MOUNTING PIN TYPE X PC mount 3.5 [0.14] J PC mount center tap S Soldering style 3.5 [0.14] Z Center tap soldering style L Long pin 11.5 [0.45] P NN Center tap with long pin If different types of pin style in the same potentiometer PIN CONFIGURATION 1 7 x 2.5 [0.098] 2.5 [0.098] 2.5 [0.098] 2.5 [0.098] 7 x 2.5 [0.098] 2 2.5 [0.098] 2.5 [0.098] 2.5 [0.098] 7 x 2.5 [0.098] 3 2.5 [0.098] 2.5 [0.098] 2.5 [0.098] 2.5 mm between gang 2.5 - 5 - 2.5 mm between gang 5 mm between gang www.vishay.com 5 For technical questions, contact: sfer@vishay.com Document Number: 51047 Revision: 26-Nov-07 P9 9 mm Multi-Ganged Potentiometer Vishay Sfernice SAP ORDERING INFORMATION (Part Number 18 digits) P 9 A 1 R 1 0 0 F I R X 1 1 0 3 M A MODEL NUMBER OF MODULES BUSHING LOCATING PEG PANEL SEALED DETENT OPTION SHAFT PIN STYLE see Pin Table First digit: Pin type X, J, S, Z, P, L W or N Second digit: Pin Configuration 1, 2, 3, 4 or N RESISTANCE CODE/ TOLERANCE CODE/ TAPER PIN STYLE - VERTICAL MOUNTING W1 Single gang vertical mounting 4.7 [0.19] W2 Dual gang vertical mounting 7.5 [0.3] 7.5 [0.3] 2.5 [0.098] 2.5 [0.098] W3 Single gang with center tap vertical mounting 3.8 10.8 [0.15] [0.43] 2.5 [0.098] W1 - W3 W2 - W4 2.5 [0.098] W4 Dual gang with center tap vertical mounting Document Number: 51047 Revision: 26-Nov-07 For technical questions, contact: sfer@vishay.com www.vishay.com 6 P9 Vishay Sfernice 9 mm Multi-Ganged Potentiometer SAP ORDERING INFORMATION (Part Number 18 digits) P 9 A 1 R 1 0 0 F I R X 1 1 0 3 M A MODEL NUMBER OF MODULES BUSHING LOCATING PEG PANEL SEALED DETENT OPTION SHAFT PIN STYLE RESISTANCE CODE/ TOLERANCE CODE/ TAPER Resistance code: 102 = 1 k to 105 = 1 M Tolerance code: M = 20 % - K = 10 % Taper: A, L, W, F, S, R or Special code given by VISHAY RESISTANCE CODE See Conversion Table for ohmic value TOLERANCE Standard: On request: M = 20 % K = 10 % VARIATION LAWS 90 % POWER RATING CHART Linear Law RATED POWER (W) S F R Vs % 50 % Ve 0.1 Non Linear Law 0.05 A W 20 % 10 % L 25 50 75 Electrical travel 270 Mechanical travel 300 0 0 10 20 30 40 50 60 70 80 90 100 110 120 130 AMBIENT TEMPERATURE (C) 15 15 SPECIAL CODES GIVEN BY VISHAY CIRCUIT DIAGRAM OPTIONS AVAILABLE * Custom shaft * Design on request a (1) b (2) cw c (3) * Specific linearity * Specific interlinearity * Specific variation law PART NUMBER DESCRIPTION (for information only) P9A 1 R 1 0 0 FI R X1 10K 20 % A e3 MODEL MODULES BUSHING LEAD LOCATING SEALING DETENT SHAFT SHAFT LEADS VALUE TOL. TAPER SPECIAL SPECIAL (Pb)PEG OPTIONS OPTIONS FREE www.vishay.com 7 For technical questions, contact: sfer@vishay.com Document Number: 51047 Revision: 26-Nov-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of P9A1R100FIRX1103MA
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |